2024 DR Equipment Walk-Behind Professional Series PRO 26 (15.5 HP)

2024 DR Equipment Walk-Behind Professional Series PRO 26 (15.5 HP)

Swipe to View More

  • Year 2024
  • Make DR Equipment
  • Model Walk-Behind Professional Series
  • Engine Model: Intek OHV
2024 DR Equipment Walk-Behind Professional Series PRO 26 (15.5 HP)

2024 DR Equipment Walk-Behind Professional Series PRO 26 (15.5 HP)

2024 DR Equipment Walk-Behind Professional Series PRO 26 (15.5 HP)

DR Field and Brush Mower

Our 15.5 HP PRO 26 has nearly 50% more power than the 10.5 HP model, and adds electric-starting, a full pressure oil pump for better mowing on slopes, more brush-busting capacity (including saplings up to 2.5" thick), and Power Steering.

Now with Power Steering!

Power Steering makes the 15.5 PRO 26 a nimble performer. Each wheel has an independent disc brake that lets you turn on a dime. Plus, if you're mowing across slopes, you can feather the uphill brake to improve the machine's tracking and traction.

And, speaking of hills, the 15.5 HP PRO 26 is a great choice for hilly properties because it includes a full-pressure oil pump–so you can mow on slopes of up to 20° and be assured of plenty of good lubrication to all parts of the engine.

This engine also gives you the convenience of convenient turn-key electric starting, so you never have to leave the operator's position to start or stop the machine. This model's extra displacement (500cc vs. 344cc for our 10.5 HP model) also provides the extra "oomph" needed to power through saplings up to 2.5" thick!

Features may include:

Power Steering is Easy on You!
  • Our disc brake system provides Power Steering. Each wheel is equipped with its own brake, operated by a hand lever. Just squeeze the brake on one side, and the mower will pivot easily around that wheel. You're in control...without wrestling the machine!
15.5 HP Briggs & Stratton Intek Engine
  • The legendary power, performance and durability of Briggs & Stratton® engines make them the obvious choice for our Walk-Behind Field and Brush Mowers. With the PRO 26 15.5 HP model, you step up to a Briggs Intek Series OHV engine, with full-pressure oil pump (great for positive lubrication even on side slopes), spin-off oil filter, 500cc of displacement, cast-iron cylinder sleeve, and easy, turn-key electric-starting.
Assembled in the USA
  • Assembled in the USA using foreign and domestic parts. Ships direct from our Wisconsin factory.
26" Pivoting Deck
  • The 26" deck is wide enough for effective clearing, but is still very maneuverable. Unlike rigid, fixed decks found on some mowers, the DR deck pivots from side to side, allowing it to follow the contours of rough terrain. This feature minimizes scalping and improves traction.
Superior Mulching
  • Our decks are enclosed on 3 sides, so that cut material is chopped and re-chopped, reducing grass and brush to a fine mulch. This means less material is left behind in your field, and none of the windrows you get with side-discharging mowers.
Gear-Driven Transmission: Lock it in and Rip it up!
  • Unlike hydrostatic drives, the DR's geared transmission lets you lock in your ground speed, leaving your hands free to steer the machine across uneven terrain (instead of fussing with touchy throttle controls as you go). With 3 forward gears, you can choose a fixed pace that's right for you.
Big, Lugged Tires for Sure Traction
  • No other brush mower has tires like this. They're the biggest (18" x 6.5" x 8"), they have superior lugged treads that pull the mower through or over just about anything, and they are sealant filled...which means they're highly resistant to puncture. Tough as nails, apparently!

Engine

Cooling Air Cooled
Displacement 500cc
Engine Type OHV
Engine Power 15.5 HP
Lubrication Full Pressure Pump w/Oil Filter
Engine Manufacturer Briggs & Stratton
Engine Model: Intek OHV
Cylinder Liners 1 (Cast-Iron Sleeved)
Starter Electric

Drivetrain

Choke Choke/Primer: Choke

Wheels & Tires

Tires, Rear Specification 18" X 6.5" X 8"
Wheels Number of Tires: 2 | Tread: Lugged

Operational

Air Filter Dual-Element

Chassis

Frame Type 12 Gauge

Dimensions

Height 48.2" | Handlebar: High: 42" Low: 38" | Shipping: 50" | Cutting: 3.5"
Length 80.5" | Blade: 26" | Shipping: 62"
Width 32.5" | Shipping: 46"
Dimensions Cutting Capacity: 4' High Grass 8' High Weeds 2.5" Thick Saplings
Cutting Width 26"

Capacities

Fuel Capacity 2 Gallon
Oil capacity 56oz

Weights

Weight, As Shipped 396 lbs
Weight 290 lbs

Features

Features Number of Blades: 1
Oil Type SAE 30W HD
Construction Material, Deck 12 Gauge, Pivotable

Warranty

Warranty Engine: 2 yrs Residential Use ,1 yr Commercial use | Machine: 2 yrs Residential Use, 90 Days Commercial Use

Product Photography